TiF-SP钛宝石可调谐飞秒激光器-上海润芒光电科技有限公司

TiF-SP钛宝石可调谐飞秒激光器

更新：2019-9-1 8:47:37 点击：

品牌：进口
型号： TiF-SP

产品介绍

TiF-SP钛宝石可调谐飞秒激光器

超快钛蓝宝石固态激光系统，超短脉冲持续时间可达12秒。

在Ti:S飞秒激光振荡器的TiF系列激光器中，TiF-SP激光系统提供了最短的脉冲宽度。该系统可以提供一个独立的版本泵与外部泵激光器或一个版本的工业标准泵激光器集成在现场或在我们的工厂。然而，Ti:S激光头的尺寸对于任何一个版本都是相同的，独立版本以后可能会以最小的额外成本安装集成泵激光器。TiF-SP泵浦激光功率可达10w。

该系统被设计为24/7作为种子振荡器为我们的大型放大器系统，从而继承了所有的稳定性增强设计特点。系统可以预先调优到一种可用的配置(12、15、30或40 fs)，盒子内的所有组件都是相同的，或者可以配置一个附加选项来在这些范围之间切换。在这种情况下，频谱中心波长调谐范围的宽度随着脉冲持续时间的增加而增大。

有三个预先设计的工厂供应组合:

-“手动”组件包括一个按下按钮的非自动电动起动器，并允许使用安装在激光盒壁上的千分尺螺丝手动调整波长和脉冲持续时间设置。

-“基本”工厂包包括一个简单的USB电动波长调谐狭缝和一个按钮非自动电动起动器。波长调谐和校准与此软件包是通过步骤编号信息，在基本的Windows软件。

-“自动”工厂包包括内置光谱仪和功率表，单触摸波长调谐预置，可配置的小部件软件，主动电源锁定功能和自动锁模启动和监测。有了这个包，该系统具有卓越的长期稳定性和更长的不间断运行时间。

整体热稳定体的TiF-SP提供了良好的被动稳定的输出辐射参数。

还提供用于输出脉冲啁啾补偿和预补偿的外部棱镜对或可调脉冲压缩器(APC-Pro或APC-Kit单元)。

产品特点

典型应用

* 波长调谐范围750-860nm

* 脉宽12-50fs

* 输出功率230-1300mW

* 单体热稳定性

* 自锁模原理设计（可选）

* 内置功率计和光谱仪（可选）

* USB接口控制波长调谐（可选）

* Time-Resolved Ultrafast Studies

* Laser Systems Design, Integration and Amplification

* Telecom and Semiconductor Studies

* Metrology and Standards

* Other Fundamental and Applied Research

* Attosecond and X-Ray Generation

* High Harmonic Generation (HHG)

TiF-SP Laser with an integrated, on-board DPSS pump laser

		TiF-SP-12	TiF-SP-15	TiF-SP-30	TiF-SP-40	TiF-SP-TU
Compressed pulse duration with external compressor^1),5)		<12 fs	<15 fs	<30 fs	<40 fs	15-50 fs (tunable)
Spectrum width (FWHM)¹⁾		>80 nm	>60 nm	>30 nm	>20 nm	from 18 nm	to 65 nm
Central wavelength tuning		800±15 nm (fixed)	790-820 nm	770-840 nm	750-860 nm	790-820 nm	750-860 nm
Output power²⁾
Pump laser power	3 W 4 W 5 W 6 W 10 W	>230 mW >330 mW >400 mW >500 mW >850 mW	>280 mW >350 mW >500 mW >650 mW >1000 mW	>350 mW >470 mW >550 mW >750 mW >1200 mW	>400 mW >530 mW >600 mW > 800 mW >1300 mW	>380 mW >500 mW >570 mW >750 mW >1200 mW	>230 mW >300 mW >380 mW >450 mW >800 mW

General optical specifications
Pulse repetition rate (fixed)	80±10 MHz
Pump laser	integrated or stand-alone DPSS 532 nm low-noise laser (up to 10 W)
Beam mode	TEM₀₀
Beam diameter (at 1/e^2)	<2 mm
Output polarization	linear, horizontal, PER >20 dB
Beam divergence	<1 mrad
Long-term stability²⁾	<0.2% rms
Noise⁴⁾	<0.1% rms
Physical dimensions (L × W × H)
Laser head dimensions	513 × 268 × 120 mm (including integrated pump laser)
Pump laser control unit dimensions	353 × 360 × 119 mm
Closed-loop chiller dimensions	430 × 340 × 190 mm
Environmental and utility specifications
Operating temperature	15-30 °C
Relative humidity	<60%, non-condensing
Voltage	single-phase; 100-240 VAC; 50/60 Hz
Power consumption	<2 kW
Available configuration packages³⁾
Thermally stabilized monolithic body	included in any package
Pulse train SMA output with mode-lock LED	included in any package
“Auto” factory package	- built-in spectrometer - single-touch wavelength tuning w. presets - built-in power meter - active output power stability locking - Windows software with configurable widgets - automatic mode-lock start and monitoring PC requirements: USB 2.0 port, Windows 10
"Basic" factory package (default)	- mode-lock LED and push-button starter - USB 2.0 wavelength tuning via step-motor slit (via step number information and calibration) PC requirements: USB 2.0 port, Windows 10
“Manual” factory package	- push-button starter - manual wavelength tuning slit
1) - when tuned to 800 nm central wavelength; 2) - after 30 min warm-up with cold start, during 12-hour continuous operation under equal room temperature conditions using recommended stabilized closed-loop chiller with proper capacity and recommended low-noise on-board integrated highly stable pump laser with active power locking; 3) - please select one of the packages for your system; certain features may be tailored or combined differently according to specific customer requirements; 4) - measured from 10 Hz to 10 MHz; 5) - external compressor is not included.